Foredom M.TXBH-EMX Bench Motor with Heavy Duty Shafting and Dial Control

MTXBH-EMX
  • $ 395.00


Here a bench style version of Foredom's higher torque flex shaft Series TXH motor comes mounted in a cast-iron base and equipped with a longer square drive shaft and heavy duty protective sheath. Bench style motors are designed for easy placement anywhere on the workbench. It is teamed up with the C.EMX-1 table top dial operated speed control in plastic housing.
Two Year Limited Warranty on Motor and Control.

MTXBH Motor Description:
This heavy duty model has exactly the same motor specifications as the M.TXB.
Series TXB motorsare Foredoms most powerful flex shaft machines with1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.
This modelcomes equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.28H, H.30H and H.44HT.
MTXBH motors are available ONLY in 115 Volt.

Foredoms permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control.

C.EMX-1 Speed Control Description:
The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made tofit the motor's shielded-type plug. The C.EMX-1is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-34" wide, 2-58" high, ship wt 2 lbs./1 kg.

Handpieces are available separately and Required to Operate your Flex Shaft Machine. H.25H, H.30H, H.44HT and H.28H are Foredom's four square drive handpieces that work with this motor-speed control combination and are shown below under Related Products.

We Also Recommend