Foredom M.SR-SCT SR Hang-Up Motor, Metal Speed Control, Choice of HandpieceK8310
Use Product Options to Select Handpiece:
K8302:has H.30 Handpiece
K8310:has H.44T Handpiece
K8311:has H.8 Handpiece
K8313:has H.20 Handpiece
K8322:has H.43T Handpiece
Flex Shaft Tool Sets include popular combinations of motors, speed controls, and handpieces - the three key components of a complete flexible shaft machine. Unlike our Pre-Packed Kits, they do NOT come with any accessory assortments, but do include a tube of grease. The K8301 and K8301-2 (230 Volt version) are the only sets that come packed in a printed box. All other sets come packed in a white box.
Motor and Speed Control carry a 2 Year Limited Warranty.
1. Series SR Motor:
Foredom's most popular and best motor for general use. The 1/6 HP, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors - 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging and our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredoms interchangeable handpieces.
2. C.SCT Speed Control:
Offers the same electronics and smooth control as the C.FCT but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed.
3. Flexible shaft grease
4. Handpiece- All are members of Foredom's system of interchangeable handpieces:
* H.30 Handpiece:
Foredom's most popular general purpose handpiece features a 3-jaw, geared chuck with a 0-5/32" capacity. Accessory changes are easy with this handpiece using the supplied HPCK-0 Chuck Key.
* H.44T Handpiece:
Collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4". It comes with 3/32", 1/8" and 1/4" collets. The tapered design allows for close and safe work.
* H.8 Handpiece:
H.8 is a slim collet type handpiece with pre-lubricated ball bearings that require no additional lubrication. It has a chuck guard that slides back when changing burs. Comes with 3/32" and 1/8" collets and chuck wrenches for changing collets and accessories.
* H.20 Handpiece:
H.20 Handpiece is a quick change handpiece for exclusive use with 2.35mm (3/32") shank burs. Has molded plastic grip and lever action.
H.43T is a shorter version of the H.44T and accepts accessories with up to 1/4" diameter shanks. Has pre-lubricated ball bearings that require no additional lubrication. Comes with 3/32", 1/8" and 1/4" collets, pin and wrench for changing collets and accessories.
We Also Recommend
Grobet USA Flexible Flex Shaft Motor Quick Change Handpiece S300 1/8HP 34.625