Foredom M.LXH-SXR Hang-Up Motor with Heavy Duty Shafting and Metal Foot Control

MLXH-SXR
  • $ 340.00


Here ourhigh torque/low speedflex shaft model, the M.LX Hang-up style Motor, is equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.SXR-1 foot operated Speed Control inmetal housing.
Two Year Limited Warranty on Motor and Control.

MLXH Motor Description:

This heavy duty model has exactly the same motor specifications as the M.LX.

These permanent magnet motors are specifically designed for high torque/low speedapplications, offering more power for jobs like stone setting, wax modeling, and pearl drilling.Heavy duty Series LXH flex shafts feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm and come equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.28H, H.30H and H.44HT.


MLXH motors are available in 115 Volt and 230 Volt.
Foredoms permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control.

C.SXR-1 Speed Control Description:
This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It alsohas a special plug that fits the motor's shielded plug.
For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, MLXH and M.LXBH motors.
6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.
Itis interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls.

Handpieces are available separately and Required to Operate your Flex Shaft Machine. H.25H, H.30H, H.44HT and H.28H are Foredom's four square drive handpieces that work with this motor-speed control combination and are shown below under Related Products.

Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.


We Also Recommend