Foredom M.LXBH-EMX Bench Motor with Heavy Duty Shafting and Dial Control

MLXBH-EMX
  • $ 370.00


Here a bench style version of Foredom'shigh torque/low speedflex shaft model, the MLXBH motor comes mounted in a cast-iron base and equipped with a longer square drive shaft and heavy duty protective sheath. Bench style motors are designed for easy placement anywhere on the workbench. It is teamed up with the C.EMX-1 table top dial speed control in plastic housing.
Two Year Limited Warranty on Motor and Control.

MLXBH Motor Description:
This heavy duty model has exactly the same motor specifications as the M.LXB. These permanent magnet motors are specifically designed for high torque/low speedapplications, offering more power for jobs like stone setting, wax modeling, and pearl drilling.Heavy duty Series LXBH flex shafts feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm and come equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H.

MLXBH motors are available in 115 Volt and 230 Volt.

Foredoms permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control.

C.EMX-1 Speed Control Description:
The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made tofit the motor's shielded-type plug. The C.EMX-1is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-34" wide, 2-58" high, ship wt 2 lbs./1 kg.


Handpieces are available separately and Required to Operate your Flex Shaft Machine. H.25H, H.30H, H.44HT and H.28H are Foredom's four square drive handpieces that work with this motor-speed control combination and are shown below under Related Products.

We Also Recommend